Vasai Virar, Palghar, Maharashtra
GST No. 27ALPPC2857F1Z0
Approx. Rs 1,500 / PieceGet Latest Price
Product BrochureProduct Details:Brand | Analysis |
Base Shape | Round |
Usage/Application | Laboratory |
Shape | Round |
Material | Stainless Steel |
Packaging Type | Box |
Country of Origin | Made in India |
Approx. Rs 1,500 / PieceGet Latest Price
Product BrochureProduct Details:Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Material Grade | SS304 |
Capacity | 8 |
Surface Finish | Polished |
Usage/Application | Laboratory |
Base Shape | Round |
Country of Origin | Made in India |
Additional Information:
Approx. Rs 82,000 / PieceGet Latest Price
Product Details:Brand | Analysis |
Size | 350x390x510 mm |
Usage/Application | Laboratory |
Display Type | LCD Display 20x4 |
Voltage | 220 V |
Phase | Single Phase |
Frequency | 50 Hz |
Packaging Type | Box |
Country of Origin | Made in India |
Approx. Rs 75,000 / PieceGet Latest Price
Product BrochureProduct Details:Minimum Order Quantity | 1 Piece |
Frequency | 50 Hz |
Voltage | 220 V |
Material | Stainless Steel |
Capacity | 250 ml |
Weight | 15 Kg |
Display | 20 x 2 Line back lighted LCD Display |
Country of Origin | Made in India |
OVERVIEW:
Tapped Density Tester is Tapped Density Analyser or Tapped Density Meter. AIQS-2010 Tapped Density Tester is a bulk density tester used to measure the tapped density of bulk powders, as well as granulated or flaked materials by standardized and repeatable procedures. & meet all international standards such as USP 616, ASTM, ISO, EP etc.
PRINCIPLE:
Definition of tapped density is an increased bulk density attained after mechanically tapping a container containing the powder sample (tap density testing machine). Tapped density is obtained by mechanically tapping a graduated measuring cylinder or vessel containing a powder sample.
After observing the initial powder volume or weight, the apparatus measuring cylinder or vessel is mechanically tapped, and volume or weight readings are taken until little further volume or weight change is observed. The mechanical tapping is achieved by raising the cylinder or vessel and allowing it to drop under its own weight a specified distance by either of three methods as during tapping may be preferred to minimize any possible separation of the mass during tapping down. This parameter is very important in packing the material. During tapping of the sample, the smaller particles try to fit themselves in gaps of the larger particles and hence the total volume of the powder reduces.
FEATURES:
Ø Complies with all international standards such as USP 616 , ASTM, ISO, EP etc.
Ø Supports USP 1 (300 taps per min ) & USP2 ( 250 taps per min ) and ASTM test methods& User Defined Method).
Ø Simultaneous rotating and tapping motion assures evenly packed surface
Ø 20 X 4 character LCD.
Ø Online validation of strokes / min.
Ø USER Define Mode with different strokes.
Ø Calculation and printout of tests like tapped density, compressibility index and Hausner ratio.
Ø Supports 10ml ,50ml, 100 ml and 250 ml cylinders.
Ø Printer port (Rs232,485) for printing test results with validation report as per cGMP standards.
Ø Tap height adjustable from 3 up to 14 mm to meet all standards.
Ø In addition to default frequency, user can freely set any rpm to meet special requirement.
Ø In addition to tap number, user can freely set any tap number to meet special requirement.
Ø Login either as Administrator or User. Only Admin can modify the setup, GMP compliance.
Ø Flow ability such as Hausner ratio or Compressibility are obtained during measure tap density.
Ø Sample Loading Volume: standard 5-250 mL or as per request.
Ø Test Results are saved to Database for record, GMP compliance.
Ø 110/220V and plug available as per request.
Ø Double work stations.
Ø Appearance is exquisite, light weight and size, reasonable structure for easy maintenance.
Approx. Rs 82,000 / PieceGet Latest Price
Product Details:Voltage | 220 V |
Frequency | 50 Hz |
Color | White |
Usage/Application | Laboratory |
Display Type | Digital |
Material | Mild Steel |
Country of Origin | Made in India |
Approx. Rs 45,000 / PieceGet Latest Price
Product Details:Minimum Order Quantity | 1 Piece |
Voltage | 220 V |
Frequency | 50 Hz |
Display Type | Digital |
Usage/Application | Laboraotry |
Material | Mild Steel |
Country of Origin | Made in India |
Additional Information:
Approx. Rs 75,000 / PieceGet Latest Price
Product Details:Display Type | 5'' TFT LCD With Touch Screen |
Color | White |
Size | 350x300x450 mm |
Usage/Application | Laboratory |
Weight | 10 Kg |
No. Of Drums | 2 |
Country of Origin | Made in India |
Friability testing is used to test the durability of tablets during packing processes and transit. This involves repeatedly dropping a sample of tablets over a fixed time, using a rotating drum with a baffle. The result is inspected for broken tablets, and the percentage of tablet mass lost through chipping.
QFR 200 is a Double drum tablet friability and abrasion test instrument. It is manufactured in compliance to the USP (1216), EP (2.9.7) and JP (14) Pharmacopoeias.
Explore More Products
© Analysis Instruments. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited